Building a great deck for typical Kiwi indoor-outdoor living is on every home-owner's list at some point. The deck we are building here is a fairly normal slatted timber deck less than one metre high. This article is an overview of general steps in building a deck and is intended as a broad illust...
In creating a fully automated target, with spring-back target buttons controlled by microprocessors, I was able to compare the workings of Arduino and PICAXE. Arduino and PICAXE are two very different devices—like comparing a revolver and a shotgun. There are smaller Arduinos and bigger PICAXE...
When designing a house, first build your giant shed where you can make joinery for the house-to-be. That was the thought of Julian Pirie. But he was to take a special route—he decided to model his barn-like “shed” on old-style English oak barns, typically housing Aston Martins in magazines p...
Without knowing electronics, it’s easy to tackle this small robot which demonstrates how a machine can be programmed to back off obstacles it hits. Mark Beckett helped to construct his daughter Hayley’s easy-to-make “HaloBOT” which is controlled by PICAXE. You can follow the building proce...
Restoring old motorbikes and cars is Dad’s passion. The garage is home to four of Dad’s prize beauties all lovingly semi-restored in various stages of TTI (Time Till Ignition). The projects in question are two cars: 1956 Wolseley 6/90 Series 1 and 1935 Hudson de Lux 8 (side-valve, straight-eig...
This project to make a stool was developed as a way of introducing students to a number of basic wood-bending and shaping techniques, whilst also giving experience in several useful applications of the router. The stool consists of two legs in the form of continuous steam-bent hoops or arches, whi...
|
Advanced Search |
|
| Lost Password? | |
| Forgot your username? | |
| No account yet? Register | |
|
|
|
| Show Cart | |
|
Your Cart is currently empty.
|
|
The Centre for Fine Woodworking benches are based around the classic European/American cabinetmaker's bench which combines a broad heavy wooden surface with two vices. Originally the side or shoulder vice was simply a screw, usually made of wood set in an L-shaped structure, allowing the screw to apply pressure to the side of the main bench.