Subscribers can win with The Shed

Subscribers can win with The Shed

The odds of winning a subscription prize with The Shed are better than Lotto.
These three lucky subscribers each won a Karcher package of a water blaster and a wet vacuum worth $998 from The Shed Issue 80!

Read More

Build a basic trailer- part two

Build a basic trailer- part two

The frame is braced by angle-iron cross members and has a sturdy, ply wooden deck. It’s best to use not less than 5-ply 12 mm minimum — in this case we have used 7-ply 17 mm. With minor variations, I have built a standard 1200 mm x 1800 mm (6ft by 4ft ) domestic trailer with a solid frame of rectangular hollow section (RHS) mild steel.

Read More

Build a basic trailer - part one

Build a basic trailer - part one

A crucial step in building this trailer is to get the axle stub straight, otherwise your tyres will chop up as they run. I use a jig of angle iron to get this straight. But I can show how to do it for home workshop, simply by holding the axle stub firmly against the bottom and one side of the box section axle to ensure it is square. There must be good welds on the axle stub.

Read More

Find your copy of The Shed magazine in Australia

Find your copy of The Shed magazine in Australia

Great news for Australian Shed magazine readers, The Shed is now on sale again in all Australian states at all good newsagents.
Click on this link for a complete list of Australian retail outlets so you can find your nearest stockist. Welcome back to The Shed.
https://www.theshedmag.co.nz/…/find-your-local-australian-t…

Read More

Child's play: How to make a cubby

My daughter in Christchurch emailed that she would like a cubby house for her three young children. They had recently moved into their new house and there was a 1.5 x 5 metre garden strip adjacent to the fence in the back yard. I had read Rod Kane’s excellent article in the August/ September 2013 issue of The Shed on building a playhouse and thought at the time what a fun project that would be, so the planets were in alignment.

Read More

The Shed Issue 80, September/October 2018

The Shed Issue 80, September/October 2018

When we met Des Thomson and his expanding motorhome pod in Issue 76 of The Shed, we were very impressed with his workshop dust extractor. Happily for us all, Des has found the time to share with us how he builds these machines using and an old vacuum and the minimum of parts. Follow his step by step build of a workshop dust extractor in this Issue 80 of The Shed.


Read More

Making a Classic Work Bench: Part Two - Making the Tail Vice

Making a Classic Work Bench: Part Two - Making the Tail Vice

Right so now that your back from your warm sunny Pacific Island holiday—taken to recover from making the benchtop and frame—it’s time to get working on the vice. What we have on our hands is a beautiful little project of reasonable complexity that demands accuracy, uses both hand and machine-skills and is incredibly satisfying both when making it and using it. 

Read More

Video of master birdhouse builder Steven Price

Video of master birdhouse builder Steven Price

When builder Steven Price suffered a severe neck injury at work he turned the accident into an opportunity. The Whanganui sheddie no longer mounts scaffolding; instead he designs and constructs much smaller buildings. Enjoy this video and see Steven creating and discussing his work using totara and kauri to make stunningly unique birdhouse creations in his garden and shed.

Read More

Installing a Kitchen

Installing a Kitchen

Kitchens are the heart of a house, the control room around which everything revolves, and a room that gets a lot of use, more so than any other. It’s also a workplace where meals are prepared and often consumed. It’s a hard traffic area that sees a lot of action. Kitchen styles are constantly changing and traditionally there has been a trade off between functionality and design within a set budget.

Read More

The Shed Issue 79, July/August 2018

The Shed Issue 79, July/August 2018

In The Shed Issue 79, July/August 2018, we head to Wellington to document Shea Stackhouse making a small knife from Damascus steel, fondly known as a Puukka (that’s Finnish for small knife). While we are there we hang around to meet some knife fans who receive knife making advice from Shea at one of his regular knifemaking classes.

Read More

Time for A Spherical Clock

Time for A Spherical Clock

Here is a step by step guide to making a stylish 36mm small clock, inserted into a 50mm sphere and placed on a tapered stand which you can make easily with your woodturning lathe.
Enjoy making these clocks to sell or just for the pleasure of pursuing a hobby. For this clock, the author used pohutukawa for its density of colour and rich finish.


Read More

The Good Wood: Macrocarpa

Macrocarpa (Cupressus macrocarpa or Monterey cypress) is a native of Southern California that like another Californian species from the same Monterey area (Pinus radiata) found New Zealand to be a more comfortable environment and thrived here. It grows faster and larger here than in its native environment, possibly due to the lack of pathogens that beset it in its home environment. 

Read More