The Shed, May/June 2019 issue no 84, in shops now

The Shed, May/June 2019 issue no 84, in shops now

In the May/June 2019 Issue 84 of The Shed we share the amazing skills on one Daniel Strekier who built himself his own extraordinary bicycle… almost entirely out of wood!
It really is something to behold and you just have to sit back and admire the skills that went into making this incredible piece of usable art.
Jude Woodside sits down with Brent Sandow and gets all the background on this, NZ’s most accomplished knifemaker, who shares his inspirations and skills with us.


Read More

New Kiwi TV show - Start me up

New Kiwi TV show - Start me up

Start me up is the world's first car show based on the phenomenon of “cold starting” - an online craze where cars that haven’t run for years or more - typically decades have their engines fired up or “cold stated”.
Screening now on TVNZ On Demand and soon on the Duke channel. Click ‘Read more” to get the full rundown on the show.


Read More

A summer 2019, sheddie's tale

A summer 2019, sheddie's tale

Back in the early ‘70s, an Auckland bloke gets hold of a 25 hp Sea Horse Johnson outboard motor - it’s knackered but it has potential.
He takes it all to pieces, orders all the bits to get it up and running again then wraps it up, bits and all, in a New Zealand Herald newspaper and packs it in a box, presumably as a rainy day project. For reference, the outboard is from 1970 and the Herald is from December 1975.

Read More

A racy go kart

A racy go kart

First off, we had to come up with a basic design under the KISS (Keep It Simple, Stupid) rule, keeping in mind the fact that the kids are getting older and harder on the gear. So I decided that easily replaced components were a key at this stage. Number One son is only going to get taller and no doubt half the neighbourhood would want to have a crack at setting the fastest lap around the street, so we had to include an adjustable one-size-fits-all seat in the design.

Read More

Wooden toys - make a Flintstones' Car

Wooden toys - make a Flintstones' Car

The toys are made from kiln dried, pine, kindly donated. PVA glue holds everything together. I avoid metal hooks or eyes, which may be unscrewed or cause injury. The toys are undercoated, painted with acrylic paint and finished with a coat of Polycrylic ™which gives a gloss finish for cleaning.  I find the Resene™ test pots a worthwhile ‘investment’.

Read More

The Shed, March/April issue no 83 on sale now

The Shed, March/April issue no 83 on sale now

In the March/April 2019 Issue 83 of The Shed we get stuck into that huge home job that, when you do yourself, can save you thousands of dollars - house painting.
We talk to to the paint and filling product manufacturers to get all the latest technical info and arm you with advice on how best to undertake this very important part of home maintenance. With the current paints, technology and fillers you will learn techniques and methods that may amaze you.

Read More

The Shed 82, Jan/Feb 2019 issue on sale now

The Shed 82, Jan/Feb 2019 issue on sale now

In The Shed 82, the Jan/Feb 2019 issue, its time to join the low & slow cooking revolution - to do that we need to build our own offset smoker barbeque.
In our cover story this issue we showcase three sheddies from around the country as they have their own way of making a smoker just the way they like it. Two out of steel and one out of a wine barrel, yes, a wine barrel. We have all you need to know about low & slow cooking with rubs, woods, cuts - the lot. Get building, get smoking and get stuck in.

Read More

Bend it

Bend it

This design-and-make plan will enable you to make a small pan sheet metal folder that folds mild sheet metal from 18 to 26 gauge. With it, you’ll be able to fold “U” or “Z” sections or a lip on a sheet of metal. The way we’ve constructed the metal folder will also allow you to bend metal to more than 90 degrees—try that with two pieces of angle iron mounted in the vice.

Read More

Make a simple outrigger canoe

Make a simple outrigger canoe

To build it, I concentrated on the advice of most waka ama advocates: that the canoe should be made of locally available materials, quick to assemble on the launching area and very cheap to make.
This waka cost me less than $200 by using recycled material and left-over house paint for the finish. I did not work from plans but used a cardboard model that I made as a guide. The waka takes less than two minutes to assemble after we take it off its trolley.

Read More

Diamond jubilee for boots that shine in the mud

Diamond jubilee for boots that shine in the mud

Surprisingly, the modern Red Band gumboot is virtually identical to the original model, apart from the addition of a sponge innersole. Skellerup made the boots in its Woolston factory in Christchurch until the late 80s. It continues to make all the components and the boots are still handmade the same way in Skellerup’s factory in Jiangsu, China.

Read More

Make a handy saw bench jig

Make a handy saw bench jig

I regularly need to cut a multiple number of short pieces on my saw bench for small box components, kids’ building blocks, small pieces for furniture etc. In the past I have clamped in place various contraptions to ensure each piece is the same length. It is difficult to hold small pieces to cut them accurately but this jig solves the problem. It attaches to the saw bench in seconds and probably takes longer to get out of the cupboard than to fit.

Read More

Get to know the North Shore mens’ shed plus, how the New Zealand mens’ shed movement began

Get to know the North Shore mens’ shed plus, how the New Zealand mens’ shed movement began

What could be better than spending time in a shed? How about a bigger shed, the right tool for the job on hand, and ready access to timely tips and tricks that might save a wince-inducing blunder?  
If that sounds like a good deal, you could hardly do better than to take yourself off to your local Men’s Shed and get that project under way there.

Read More

Subscribers can win with The Shed

Subscribers can win with The Shed

The odds of winning a subscription prize with The Shed are better than Lotto.
These three lucky subscribers each won a Karcher package of a water blaster and a wet vacuum worth $998 from The Shed Issue 80!

Read More

The Shed Issue 81, Nov/Dec 2018 on sale now

The Shed Issue 81, Nov/Dec 2018 on sale now

In The Shed 81, Nov/Dec 2018 issue, we head to Blenheim to meet school teacher and dedicated sheddie Dave Pauling.
Dave makes extraordinary guitars in his shed from recycled native timber and shares his skills with us so readers can have a go too. He nicknames some of his electric guitars ‘Les Paulings’ - nice touch.

Read More

New lower subscription rates for Australia

New lower subscription rates for Australia

More good news for Australian Shed readers - we have just lowered our magazine subscription rates for you. Now that we are shipping copies of The Shed for newsagents to sell nationwide, we can also include subscription copies and avoid those huge postal costs. An Australian subscription was NZ$130, now only NZ$94! Dive in, head to magstore.nz to sign up.

Read More

Find your copy of The Shed magazine in Australia

Find your copy of The Shed magazine in Australia

Great news for Australian Shed magazine readers, The Shed is now on sale again in all Australian states at all good newsagents.
Click on this link for a complete list of Australian retail outlets so you can find your nearest stockist. Welcome back to The Shed.
https://www.theshedmag.co.nz/…/find-your-local-australian-t…

Read More

Electric motorbike build

As a designer and motorcyclist, I had the idea of building an electric motorbike for a long time. The opportunity arose when I was in my final year of an honours degree in industrial design at Victoria University. I rode a 1987 Honda VFR400 to my lectures and the bike started having engine problems. I pulled out all combustion-related components and sold them. By the time I had a plan for an electric motorbike laid out I was part-way through a post-graduate diploma in Computer Aided Design (CAD) at Christchurch Polytechnic.

Read More