How I decided to refurbish an old drill press

How I decided to refurbish an old drill press

I regretted losing the Dyco as it was quite clear the newly acquired, imported machine I had purchased was nowhere near the quality. I bought the Tanner because I had an idea to build a small vertical slotting machine to cut small keyways and splines inside gears for my old motorcycles. I had made up a rather ugly prototype for a slotter as a proof-of-concept test which seemed to work OK.
But a very good friend of mine had recently built such a unit using an old unwanted drill press so this was the main motivation for this purchase.

Read More