The Shed 82, Jan/Feb 2019 issue on sale now

The Shed 82, Jan/Feb 2019 issue on sale now

In The Shed 82, the Jan/Feb 2019 issue, its time to join the low & slow cooking revolution - to do that we need to build our own offset smoker barbeque.
In our cover story this issue we showcase three sheddies from around the country as they have their own way of making a smoker just the way they like it. Two out of steel and one out of a wine barrel, yes, a wine barrel. We have all you need to know about low & slow cooking with rubs, woods, cuts - the lot. Get building, get smoking and get stuck in.

Read More

Bend it

Bend it

This design-and-make plan will enable you to make a small pan sheet metal folder that folds mild sheet metal from 18 to 26 gauge. With it, you’ll be able to fold “U” or “Z” sections or a lip on a sheet of metal. The way we’ve constructed the metal folder will also allow you to bend metal to more than 90 degrees—try that with two pieces of angle iron mounted in the vice.

Read More

Make a simple outrigger canoe

Make a simple outrigger canoe

To build it, I concentrated on the advice of most waka ama advocates: that the canoe should be made of locally available materials, quick to assemble on the launching area and very cheap to make.
This waka cost me less than $200 by using recycled material and left-over house paint for the finish. I did not work from plans but used a cardboard model that I made as a guide. The waka takes less than two minutes to assemble after we take it off its trolley.

Read More

Diamond jubilee for boots that shine in the mud

Diamond jubilee for boots that shine in the mud

Surprisingly, the modern Red Band gumboot is virtually identical to the original model, apart from the addition of a sponge innersole. Skellerup made the boots in its Woolston factory in Christchurch until the late 80s. It continues to make all the components and the boots are still handmade the same way in Skellerup’s factory in Jiangsu, China.

Read More

Make a handy saw bench jig

Make a handy saw bench jig

I regularly need to cut a multiple number of short pieces on my saw bench for small box components, kids’ building blocks, small pieces for furniture etc. In the past I have clamped in place various contraptions to ensure each piece is the same length. It is difficult to hold small pieces to cut them accurately but this jig solves the problem. It attaches to the saw bench in seconds and probably takes longer to get out of the cupboard than to fit.

Read More

Get to know the North Shore mens’ shed plus, how the New Zealand mens’ shed movement began

Get to know the North Shore mens’ shed plus, how the New Zealand mens’ shed movement began

What could be better than spending time in a shed? How about a bigger shed, the right tool for the job on hand, and ready access to timely tips and tricks that might save a wince-inducing blunder?  
If that sounds like a good deal, you could hardly do better than to take yourself off to your local Men’s Shed and get that project under way there.

Read More

Subscribers can win with The Shed

Subscribers can win with The Shed

The odds of winning a subscription prize with The Shed are better than Lotto.
These three lucky subscribers each won a Karcher package of a water blaster and a wet vacuum worth $998 from The Shed Issue 80!

Read More

The Shed Issue 81, Nov/Dec 2018 on sale now

The Shed Issue 81, Nov/Dec 2018 on sale now

In The Shed 81, Nov/Dec 2018 issue, we head to Blenheim to meet school teacher and dedicated sheddie Dave Pauling.
Dave makes extraordinary guitars in his shed from recycled native timber and shares his skills with us so readers can have a go too. He nicknames some of his electric guitars ‘Les Paulings’ - nice touch.

Read More

New lower subscription rates for Australia

New lower subscription rates for Australia

More good news for Australian Shed readers - we have just lowered our magazine subscription rates for you. Now that we are shipping copies of The Shed for newsagents to sell nationwide, we can also include subscription copies and avoid those huge postal costs. An Australian subscription was NZ$130, now only NZ$94! Dive in, head to magstore.nz to sign up.

Read More

Find your copy of The Shed magazine in Australia

Find your copy of The Shed magazine in Australia

Great news for Australian Shed magazine readers, The Shed is now on sale again in all Australian states at all good newsagents.
Click on this link for a complete list of Australian retail outlets so you can find your nearest stockist. Welcome back to The Shed.
https://www.theshedmag.co.nz/…/find-your-local-australian-t…

Read More

Electric motorbike build

As a designer and motorcyclist, I had the idea of building an electric motorbike for a long time. The opportunity arose when I was in my final year of an honours degree in industrial design at Victoria University. I rode a 1987 Honda VFR400 to my lectures and the bike started having engine problems. I pulled out all combustion-related components and sold them. By the time I had a plan for an electric motorbike laid out I was part-way through a post-graduate diploma in Computer Aided Design (CAD) at Christchurch Polytechnic.

Read More

Video of Judy Waterston, blacksmith in Duntroon North Otago

Video of Judy Waterston, blacksmith in Duntroon North Otago

In this short video we head to a small town in North Otago to enjoy the ancient skill of the blacksmith. This smithy is unique in that it also acts as a school that a group of farmers rallied together to ensure its survival. As featured in Issue 80 of The Shed

Read More

The Shed Issue 80, September/October 2018

The Shed Issue 80, September/October 2018

When we met Des Thomson and his expanding motorhome pod in Issue 76 of The Shed, we were very impressed with his workshop dust extractor. Happily for us all, Des has found the time to share with us how he builds these machines using and an old vacuum and the minimum of parts. Follow his step by step build of a workshop dust extractor in this Issue 80 of The Shed.


Read More

Video of Carmen Simmonds, glass artist

Video of Carmen Simmonds, glass artist

In Issue 79 of The Shed we featured Whanganui glass artist Carmen Simmonds. In this video by Tracey Grant, Carmen shows us in some detail a few of her creative practices and we showcase some of her outstanding creations with glass and occasionally brass. Carmen is currently president of the New Zealand Society of Artists in Glass.

Read More

The Shed Issue 79, July/August 2018

The Shed Issue 79, July/August 2018

In The Shed Issue 79, July/August 2018, we head to Wellington to document Shea Stackhouse making a small knife from Damascus steel, fondly known as a Puukka (that’s Finnish for small knife). While we are there we hang around to meet some knife fans who receive knife making advice from Shea at one of his regular knifemaking classes.

Read More