The Shed Issue 81, Nov/Dec 2018 on sale now

The Shed Issue 81, Nov/Dec 2018 on sale now

In The Shed 81, Nov/Dec 2018 issue, we head to Blenheim to meet school teacher and dedicated sheddie Dave Pauling.
Dave makes extraordinary guitars in his shed from recycled native timber and shares his skills with us so readers can have a go too. He nicknames some of his electric guitars ‘Les Paulings’ - nice touch.

Read More

Forging ahead

Forging ahead

When I came to select an old gas bottle for this project, the most likely candidate proved to be full of gas. Far too much gas to vent so having committed to making the forge I opted for the second-best option and bought a new bottle. At only $45 it wasn’t a huge outlay although I know that many of you will be shaking your heads at my frivolous wastefulness.
Buying a new bottle has one very handy up side: there is no volatile gas in the bottle. If there was then certain precautions are absolutely essential.

Read More

Subscribers can win with The Shed

Subscribers can win with The Shed

The odds of winning a subscription prize with The Shed are better than Lotto.
These three lucky subscribers each won a Karcher package of a water blaster and a wet vacuum worth $998 from The Shed Issue 80!

Read More

Build a basic trailer- part two

Build a basic trailer- part two

The frame is braced by angle-iron cross members and has a sturdy, ply wooden deck. It’s best to use not less than 5-ply 12 mm minimum — in this case we have used 7-ply 17 mm. With minor variations, I have built a standard 1200 mm x 1800 mm (6ft by 4ft ) domestic trailer with a solid frame of rectangular hollow section (RHS) mild steel.

Read More

The most fun you can have on three wheels!

The most fun you can have on three wheels!

Cambridge sheddie Kim Dawick decided to build a drift trike for a mate’s birthday. It was relatively simple and so much fun to ride he decided to build eight more to bring the old gang from school back together. Click through to see the Kim take Mike’s trike for a spin, and another one, and another one….

Read More

Build a basic trailer - part one

Build a basic trailer - part one

A crucial step in building this trailer is to get the axle stub straight, otherwise your tyres will chop up as they run. I use a jig of angle iron to get this straight. But I can show how to do it for home workshop, simply by holding the axle stub firmly against the bottom and one side of the box section axle to ensure it is square. There must be good welds on the axle stub.

Read More

New lower subscription rates for Australia

New lower subscription rates for Australia

More good news for Australian Shed readers - we have just lowered our magazine subscription rates for you. Now that we are shipping copies of The Shed for newsagents to sell nationwide, we can also include subscription copies and avoid those huge postal costs. An Australian subscription was NZ$130, now only NZ$94! Dive in, head to magstore.nz to sign up.

Read More

Basics of Welding Aluminium: Part 4

Basics of Welding Aluminium: Part 4

Aluminium alloys are used in so many different applications in our modern world, from motorbike frames and boats, big and small, to super yachts. The list is endless. So when it comes to building, manufacturing repairs, welding is often the best solution. Most aluminium alloys are weldable, but it is important to understand the special aspects and quirks of working and welding aluminium and working out the best welding technique is important.

Read More

Find your copy of The Shed magazine in Australia

Find your copy of The Shed magazine in Australia

Great news for Australian Shed magazine readers, The Shed is now on sale again in all Australian states at all good newsagents.
Click on this link for a complete list of Australian retail outlets so you can find your nearest stockist. Welcome back to The Shed.
https://www.theshedmag.co.nz/…/find-your-local-australian-t…

Read More

Video of Judy Waterston, blacksmith in Duntroon North Otago

Video of Judy Waterston, blacksmith in Duntroon North Otago

In this short video we head to a small town in North Otago to enjoy the ancient skill of the blacksmith. This smithy is unique in that it also acts as a school that a group of farmers rallied together to ensure its survival. As featured in Issue 80 of The Shed

Read More

Make your own linisher

Make your own linisher

A linisher is near the top of the list of the most-used tools in the workshop, whether for deburring steel to stop cuts in the hands, or sharpening tools and drills. There are few projects where it doesn’t get used. They seem to be expensive for what they are, and can easily be made for a fraction of the purchase price. The budget using new parts for this project is around $400.

Read More

The Shed Issue 80, September/October 2018

The Shed Issue 80, September/October 2018

When we met Des Thomson and his expanding motorhome pod in Issue 76 of The Shed, we were very impressed with his workshop dust extractor. Happily for us all, Des has found the time to share with us how he builds these machines using and an old vacuum and the minimum of parts. Follow his step by step build of a workshop dust extractor in this Issue 80 of The Shed.


Read More

The Shed Issue 79, July/August 2018

The Shed Issue 79, July/August 2018

In The Shed Issue 79, July/August 2018, we head to Wellington to document Shea Stackhouse making a small knife from Damascus steel, fondly known as a Puukka (that’s Finnish for small knife). While we are there we hang around to meet some knife fans who receive knife making advice from Shea at one of his regular knifemaking classes.

Read More

Build Small Boat Trailer

Build Small Boat Trailer

TO BUILD A SIMPLE trailer for a small light, runabout of 10ft to 13 ft long by about 5ft wide (3-4 metres long by up to 1.5 metres wide) this design is ideal. It is suitable for a dinghy, tinny, Parkercraft or even your children’s yacht. You can adapt this economical design, but componentry is not cheap, so keep it simple if you want it to remain as affordable as possible.

Read More

Gantry crane for model railway

Gantry crane for model railway

STEPPER MOTORS are to conventional DC motors as computers are to calculators – in other words, much moresophisticated. The ability of stepper motors to specify rotation precisely both by velocity and angle opens new doors for movement control. The downside is that to get the most out of these little beauties, you need ancillary digital-pulse control circuits, a fact which may deter some sheddies from exploiting their numerous advantages.

Read More